Vigor 130 ADSL/VDSL Modem

MPN: V130-K
£89.00

ADSL/VDSL Bridge/Modem

Vigor 130 VDSL2/ADSL Modem

The DrayTek Vigor 130 is a VDSL2 and ADSL modem with an Ethernet connection; it is not a router but a true ADSL/VDSL Ethernet Modem (bridge). It provides proven compatibility with UK VDSL2 and ADSL technologies; extensively tested and tuned to provide a robust and reliable DSL connection.

By providing a direct bridge between the DSL connection and Ethernet, the connected device (firewall, router or PC) can log into the Internet (your ISP) directly and have full control over the Internet connection - that makes the Vigor 130 a unique product.

You can add VDSL2 and ADSL connectivity to any Ethernet-WAN router simply by connecting up the DrayTek Vigor 130 modem.

Vigor 130 Schematic

 

Other Ethernet 'modems' may use workarounds to get a public IP address 'through' to your secondary device/client, requiring non-standard operation and complicated dual-stage setup (modem logs in, router routes) but the Vigor 130 provides the secondary device with a real routed IP connection and the ability to fully manage the connection, making setup easy. In most cases, the Vigor 130 needs no setup or configuration - just plug it in and set up your PC or router. All login/ISP details are entered on the connected client device, not the Vigor 130. The actual connection to your ISP is still PPPoA or PPPoE (depending on your ISP and line type).

This transparent bridging method also differs from using a normal ADSL/VDSL router which logs in itself and then uses NAT or multiple public IP addresses to create an onward client connection for your secondary device; that is not IP Address thrifty and can introduce secondary NAT compromises or interference with various protocols/traffic. With the Vigor 130 bridge/modem, you get a true single public IP address (or multiple, if you have them) straight through to your firewall/router.

Line Info in Vigor Router Interface

When connected to a DrayTek Vigor router, DSL line information is displayed in the router's own web interface, alongside any built-in DSL interface stats.

Here WAN1 is connected to VDSL2 through the Vigor 2862's built-in modem. WAN2 is connected up to another VDSL2 line through the Vigor 130 modem:

Vigor130 Line Stats in Vigor 2830 WUI

More Information
mpn V130-K
Specifications

Specifications

Vigor 130 VDSL2/ADSL Modem

Product Code EAN UK Product Description Notes
V130-K 471 677907 516 8 Vigor 130 (UK/IE)  

Technical Specification (UK Hardware Spec.)

  • Physical Interfaces

    • RJ-11 - ADSL/VDSL2 Line
    • RJ-45 - Gigabit 10/100/1000BaseT Ethernet (auto-sensing/MDI-X)
    • Power Socket (DC)
  • Features

    • Pre-Configured VDSL2/ADSL to Ethernet Bridging Modem
    • Built-in Diagnostics (WUI / CLI)
    • Support for MTU1508 (Jumbo Frames)
    • Bridging mode IPTV (YouView, Sky Q) Relay
    • IPv6 and IPv4 Compatible
    • DSL Line Stat information relay to DrayTek Vigor routers
  • Protocol Support

    • ITU-T G.993.1 VDSL
    • ITU-T G.993.2 VDSL2
    • ITU-T G.997.1
    • VDSL Annex A, Annex C, Annex M
    • VDSL Profiles: 8a, 8b, 8c, 8d, 12a, 12b, 17a
    • VDSL2 Vectoring
    • BT SIN 498 MCT Approved
    • OLR, UPBO, DBPO, US0
    • ANSI T1.413 Issue 2
    • ITU-T G.992.1 G.dmt (ADSL)
    • ITU-T G.992.3 ADSL2
    • ITU-T G.992.5 ADSL2+
    • ADSL Annex L (READSL)
    • ADSL Annex M
    • PPPoA-PPPoE or PPPoE-PPPoE Bridging (WAN to LAN)
    • RFC-2684 / RFC-1483
  • Environmental

    • Operating : 0 ° ~ 45 ° C
    • Storage : -25 ° ~ 70 ° C
    • Humidity : 20% ~ 90% Non-Condensing
  • Dimensions

    • Width: 182 mm
    • Depth: 125 mm
    • Height: 40 mm
  • Power

    • 220-240VAC (to DC with supplied Plug-Top PSU).
    • Power Adapter: DC 12V/1A
    • Max. Power: 6 watt
  • Warranty

    • Two (2) Years RTB
©1989-2020 SEG Communications. All Rights Reserved.